Description

Growcol 250 kW Commercial Energy Storage System — Indoor

Bundled configuration: GW-MPS0250 250 kW three-phase hybrid inverter, Pylontech HV lithium stack (≈268.8 kWh), multi-BMS control with MBMS1000 main module, HV cable kits & 302.5 kWp PV field (550 × 550 W)

Overview

Engineered for high-duty commercial, agricultural and light-industrial facilities, the Growcol 250 kW Commercial ESS combines a 250 kW hybrid inverter, a modular high-voltage LFP battery and a ~302.5 kWp PV array. The system delivers dependable backup, peak-shaving and time-of-use optimization with closed-loop battery management and installer-friendly indoor hardware.

Key Highlights

• 250 kW three-phase hybrid output for seamless PV + battery blending and robust backup
• ≈268.8 kWh HV lithium storage (48 × 5.6 kWh Pylontech HM3A180) for extended reserve time
• High-voltage architecture → lower DC currents, slimmer cabling, higher round-trip efficiency
• Closed-loop control via CAN/RS485 for accurate SoC, optimized charge profiles and protection
• ≈302.5 kWp PV array (550 × 550 W) sized for strong daytime offset and rapid battery recharge
• Modular & serviceable design with field-replaceable modules and front-access wiring
• Comprehensive protections: OV/UV/OCP/OTP, short-circuit and insulation monitoring

Typical Applications

• Retail centres, logistics depots, workshops, cold rooms and petrol stations
• Farms & agri-processing (irrigation, packhouses, refrigeration)
• Office parks, clinics, schools, telecom and light-industrial plants

Technical Summary*

• Inverter: Growcol GW-MPS0250, 250 kW three-phase hybrid
• Battery Energy: ≈268.8 kWh (48 × 5.6 kWh HV LFP modules)
• Chemistry: LiFePO₄ (LFP) — high stability and long cycle life
• Battery Control: 3 × SC1500 (M3A180) master BMS + MBMS1000 main battery management module
• System Topology: High-voltage series stack(s) with dedicated HV control & protection
• PV Field: ≈302.5 kWp (550 × 550 W half-cell mono)
• Communications: CAN / RS485 (inverter ↔ BMS), monitoring-ready
• Cycle life (typical): ≥6,000 cycles under standard DoD/conditions
• Operating temp (battery): Charge 0–50 °C / Discharge −20–55 °C; optimal 15–30 °C
• Installation: Indoor, ventilated location; upstream DC/AC protection and earthing per SLD

*Actual limits and performance depend on site design, utility rules, ambient conditions and commissioning settings. Always size breakers/fuses and cable gauges to code and the final single-line diagram.

What’s in the Bundle

• 1 × GW-MPS0250 Growcol 250 kW solar storage hybrid inverter
• 3 × CAB-PYHV5M Pylontech HV cable 5 m (black)
• 3 × CAB-PYHV5MR Pylontech HV cable 5 m (red)
• 3 × HM3A180CAB KIT Pylontech HM3A180 HV cable kit
• 48 × PYLONHM3A180 Pylontech HM3A180 5.6 kWh HV battery modules (≈268.8 kWh total)
• 3 × SC1500BMS Pylontech SC1000 M3A180 master BMS units
• 1 × MB,S1KNB01V00101 Main battery management module MBMS1000
• 550 × TW550 – 550 W half-cell mono PV modules (≈302.5 kWp)

Integration, Compliance & Support

• Native closed-loop operation between GW-MPS0250 and the Pylontech HV stack for safe, optimized charging.
• Designed to meet relevant IEC/CE/UN38.3 standards (final certificates/batch docs available via authorized channel).
• Supports export limiting, generator interlock and advanced backup modes per local regulations.
• Covered by Growcol inverter and Pylontech battery warranties (regional terms apply), with design review and commissioning guidance through authorized partners.

Professional note: Validate battery-to-inverter power limits, PV charge ceilings, cabinet count/layout and interconnection requirements against the final design, firmware and local grid code before procurement.