Growcol 30 kW Commercial Energy Storage System — Indoor

Bundled configuration: GW-MPS0030 30 kW three-phase hybrid inverter, Pylontech HV lithium stack (≈56 kWh), master BMS, HV cable kit & 52.8 kWp PV field (96 × 550 W)

Note: Price excludes installation.

Overview

Compact, efficient, and installation-friendly, the Growcol 30 kW Commercial ESS is purpose-built for SMEs, farms, lodges and workshops that need reliable backup, peak-shaving, and self-consumption. It combines a 30 kW hybrid inverter with a high-voltage LFP battery (≈56 kWh) and a 52.8 kWp PV array—managed with closed-loop battery control for safety, longevity and accurate state-of-charge.

Key Highlights

• 30 kW three-phase hybrid output for seamless PV + battery blending and resilient backup
• ≈56 kWh HV lithium storage (10 × 5.6 kWh modules) sized for evening loads and outages
• High-voltage architecture → lower DC currents, slimmer cabling, higher round-trip efficiency
• Closed-loop BMS control (CAN/RS485) for precise SoC, protected charging and warranty compliance
• 52.8 kWp PV field (96 × 550 W) for strong daytime offset and rapid battery recharge
• Modular & serviceable design with front-access wiring and field-replaceable battery modules
• Comprehensive protections: OV/UV/OCP/OTP, short-circuit and insulation monitoring

Typical Applications

• Retail stores, restaurants, guesthouses, workshops and petrol stations
• Farming operations (irrigation pumps, cold rooms, packhouses)
• Clinics, schools, small office parks and telecom sites

Technical Summary*

• Inverter: Growcol GW-MPS0030, 30 kW three-phase hybrid
• Battery Energy: ≈56 kWh (10 × 5.6 kWh Pylontech HM3A180 HV, LiFePO₄)
• Battery Control: SC1500 (M3A180) master BMS, closed-loop with inverter
• PV Array: ≈52.8 kWp (96 × 550 W half-cell mono)
• Communications: CAN / RS485 (inverter ↔ BMS), monitoring-ready
• Cycle life (typical): ≥6,000 cycles under standard DoD/conditions
• Operating temp (battery): Charge 0–50 °C / Discharge −20–55 °C; optimal 15–30 °C
• Installation: Indoor, ventilated space; upstream DC/AC protection and earthing per SLD

*Actual limits and performance depend on site design, firmware and commissioning settings. Always size breakers/fuses and cable gauges to code and the final single-line diagram.

What’s in the Bundle

• 1 × GW-MPS0030 Growcol 30 kW solar storage hybrid inverter
• 10 × PYLONHM3A180 Pylontech HM3A180 5.6 kWh HV battery modules (≈56 kWh total)
• 1 × CAB-PYHV5M Pylontech HV cable 5 m (black)
• 1 × CAB-PYHV5MR Pylontech HV cable 5 m (red)
• 1 × HM3A180CAB KIT Pylontech HM3A180 HV cable kit
• 1 × SC1500BMS Pylontech SC1000 M3A180 master BMS
• 96 × TW550 – 550 W half-cell mono PV modules (≈52.8 kWp)
• 1 × HM3A180-BOX Battery cabinet for HM3A180 stack

Integration, Compliance & Support

• Native closed-loop operation between GW-MPS0030 and the Pylontech HV stack for safe, optimized charging.
• Designed to meet relevant IEC/CE/UN38.3 standards (final certificates/batch docs via authorized channel).
• Supports export limiting, generator interlock and advanced backup modes per local regulations.
• Covered by Growcol inverter and Pylontech battery warranties (regional terms apply), with design review and commissioning guidance through authorized partners.

Professional note: Validate battery-to-inverter power limits, PV charge ceilings, cabinet layout and grid-interconnection requirements against the final design and local grid code before procurement.